Skip to main content

moregeek program

【帧中继】路由器如何模拟帧中继交换机-多极客编程

使用路由器模拟帧中继配置conf tframe-relay switching开启帧中继交换机功能interface s1/0在这个接口(连接hub路由器的那个接口)模式下description Link to RouterA配置一个描述信息encapsulation frame-relay封装成帧中继链路frame intf-type dce配置成DCEframe route 102 inter

Read More

广域网中帧中继实现案例-多极客编程

帧中继( Frame Relay)是一种用于连接计算机系统的面向分组的通信方法。它主要用在公共或专用网上的局域网互联以及广域网连接。大多数公共电信局都提供帧中继服务,把它作为建立高性能的虚拟广域连接的一种途径。1.实验器材3台思科路由器   3台帧中继交换机(路由器代替)2.实验拓扑图 fr-1配置Router>enable Router#configure terminal Router(

Read More

帧中继交换机的配置-多极客编程

拓扑图:   实验过程 1.帧中继交换机配置 Router>en Router#config t Enter configuration commands, one per line.  End with CNTL/Z.

Read More